EasyN F2 series Spezifikationen

1

106. Client Software Instruction 1. Run Client Software Run Nvr_Clairvoyance.exe (globe icon)in standalone software package and then

11 Figure 2 2. Search for NVR and IP Camera After login, right click “Network video server”, and then click “searching tool”. Fig

12On “NVR-SET” screen, you will see three sub-screens including “default parameters list” which shows default parameters of NVR host

13 Figure 5： Chose "NVR search" ---“get NVR”,and then in “UDP Network settings” it will show all the IP address of o

14 Figure 6 Note: UDP network setting only use for LAN, does not support across segments use. TCP network Settings only f

15 Figure 7 Click on drop-down frame of the device type,select the camera model you want to add.Now can a

16 Figure 9 After select EasyN-H3 in the device type , please click "search"button Figure 10 Click drop-down lis

17 Figure 11 Device name : user-defined Device IP:you can search it or input it directly Port: it is the port of your camera , you

18 Figure 12 Click "add channel",input 1 into "channel",then click "confirm". Other parameter

19 Figure 14 Figure 15 Click "add schedule",in the drop-down list of "video type",select your record r

2Table of Contents 1. Safety Warnings ...

20 Figure 16 Select begin time and end time , then click "confirm". Figure 17

21Successful add a camera after doing "add device" "add channel" "add schedule" three steps.

22 5. Add"NVR Host" Click “navigation” --- right click “Network video server” --- click “add network video server”, and

23After successfully uploading, click the “logout” in the main interface, and then login again. When you successfully login, you can

24 Figure 19 Figure 20

25 Figure 21 Figure 22 Return to main screen, under network video server that is the information of NVR and camera.

26 Figure 23 Hold the left button of your mouse, drag camera name(like H3 test )to the needed window,as following : Figure2

276. Harddisk Management Click “Disk management ----- click “format” to format selected hard disk (The maximum capacity of each har

28 Figure 26 8. Online Backup Click “Online backup settings” --- “add”, input NVR IP you will backup in “backup NVRIP”, and then

299. User and User Rights Settings 1. Add User: Right click “User”, click “add user” and input parameters in “user name” and “pass

31. Safety Warnings For your safety, please read and follow the following safety warnings: 1. Do not expose the NVR to any heat sou

30 Figure 29 11. Alarm Settings / Streaming Media Settings 1. Alarm Settings: Click “setting” --- “Alarm setting” --- select “alarm

312. Streaming Media Settings: Click “setting” --- “Streaming media setting” --- check “enable local streaming media setting” ---

32 Figure 32 2. Select the NVR you will monitor in “network navigator” and right click it --- click “monitor all cameras” to monitor

33 Figure 34 14. NVR Parameter Backup and Recovery Right click the NVR you will backup in “Network video server” --- click “paramete

34 Figure 36 15. NVR Transmit 1. Click “navigation” --- Double click the NVR you will transmit --- check “Nvr transmit” in “Nvr in

35 Figure37 2. Click “Global settings” --- click “modify” to set relevant parameters as you need--- click “enable agents transmit”

36function is mainly used when there are not enough IP addresses to assign. Users can set one IP address for the NVR, and set one IP

37“PTZ control” to enter the PTZ control interface. As shown in Figure 40: Through this function can remote control front PTZ eq

38Warranty 1 Warranty Terms a) Free-of -Charge maintenance period of the product is 18 months. During this time, we can repair it

392. Warranty Card Please cut the follow form for information and return with camera Product model Maniufacture date Client a

42. Hard Disk Installation Notice Please install DVR-specific hard disks recommend by our company. NR-1-A4 series can install a ma

40

5 Red for hard disk data line, black for power connection line. 4.Cover the chassis and then fix it with the screwdriver.

63. Product Description NR-1-A4 Series Front View: NR-1-A4 series supports maximum 1 hard disk. There are three LED indicators o

7 Name Connection instruction Power switch Power on/off Power connector 12V power connector RJ45 connector 100M network connec

84. Technical Specifications Model NR-1-A4 Video compression H.264 Video input 4 channel IP camera EasyN H3、EasyN F2 Playback r

95. Turning On / Off the Device 1. Turn On the device After the power socket is connected, press the power switch on the rear panel